Liberty Corner Computing Company

Archive for the ‘Hardware’ Category

The worlds first laptop looked a little different than the ones we’re used to today.

The Osbourne 1, introduced to the world April 1981 boasted a 5 inch monitor, 64k of RAM, dual 5-1/4 inch, 91K floppy drives, weighed in at 24.5 pounds and had a sticker price of only $1795.00. A steal, considering it came bundled with over $1500 worth of cutting edge software (circa 1981).

Available options were a 300 baud modem and an optional double density disk drives (for which an extra circuit board had to be installed) .

The Osbourne 1 was quite a hit and a brisk seller, reaching monthly sales of over $1,000,000 in September of that year.

Those mysterious Ctrl and Alt keys are often used in combination with other keys to perform some task. We often refer to these combination keystrokes as shortcut keys, because they provide an alternative to using the mouse to select menu options in programs. Shortcut keys are always expressed as:

key1+key2

where the idea is to hold down key1, tap key2, then release key1. For example, to press Ctrl+Esc hold down the Ctrl key (usually with your pinkie), tap the Esc key, then release the Ctrl key. To press Alt+F you hold down the Alt key, tap the letter F, then release the Alt key.

Like the mouse, the keyboard is a means of interacting with your computer. You really only need to use the keyboard when you’re typing text. Most of the keys on the keyboard are laid out like the keys on a typewriter. But there are some special keys like Esc (Escape), Ctrl (Control), and Alt (Alternate). There are also some keys across the top of the keyboard labeled F1, F2, F3, and so forth. Those are called the function keys, and the exact role they play depends on which program you happen to be using at the moment.

Most keyboards also have a numeric keypad with the keys laid out like the keys on a typical adding machine. If you’re accustomed to using an adding machine, you might want to use the numeric keypad, rather than the numbers across the top of the keyboard, to type numbers. It doesn’t really matter which keys you use. The numeric keypad is just there as a convenience to people who are accustomed to adding machines.

Most keyboards also contain a set of navigation keys. You can use the navigation keys to move around around through text on the screen. The navigation keys won’t move the mouse pointer. Only the mouse moves the mouse pointer.

On smaller keyboards where space is limited, such as on a notebook computer, the navigation keys and numeric keypad might be one in the same. There will be a Num Lock key on the keypad. When the Num Lock key is “on”, the numeric keypad keys type numbers. When the Num Lock key is “off”, the navigation keys come into play. The Num Lock key acts as a toggle. Which is to say, when you tap it, it switches to the opposite state. For example, if Num Lock is on, tapping that key turns it off. If Num Lock is off, tapping that key turns Num Lock on.

All of the information that’s “in your computer”, so to speak, is stored on your computer’s hard disk. You never see that actual hard disk because it’s sealed inside a special housing and needs to stay that way. Unlike RAM, which is volatile, the hard disk can hold information forever — with or without electricity. Most modern hard disks have tens of billions of bytes of storage space on them. Which, in English, means that you can create, save, and download files for months or years without using up all the storage space it provides.

In the unlikely event that you do manage to fill up your hard disk, Windows will start showing a little message on the screen that reads “You are running low on disk space” well in advance of any problems. In fact, if that message appears, it won’t until you’re down to about 800 MB of free space. And 800 MB of empty space is equal to about 600 blank floppy disks. That’s still plenty of room!